Extra Havy Duty

extra-heavy-duty-lathe-mach

Capacity

  Standard
Center height 13” -330 mm
Optional
Center height 15” -380 mm
Center height 13” -330 mm 15” -380 mm
Swing over bed 25” -635 mm 29” -735 mm
Swing over Cross slide 17” -430 mm 21” -530 mm
Swing in gape 37” -94 0mm 41” -1040 mm

Bed

Bed Lengh Admit Between Center
EHD-1 (5’-6” – 1675 mm) 22” – 555 mm
EHD-2 (7’-0” – 2135 mm) 39” -1000 mm
EHD-3 (9’-0” – 2745 mm) 64” -1625 mm
EHD-4 (10’-0” – 3050 mm) 76” -1930 mm
EHD-5 (12’-0” – 3660 mm) 100” -2540 mm
EHD-6 (14’-0” – 4270 mm) 124” -3150 mm
EHD-7 (16’-0” – 4875 mm) 147” -3700 mm
EHD-8 (18’-0” – 5485 mm) 170” -4300 mm
EHD-9 (20’-0” – 6100 mm) 195” -4900 mm
Bed type 2V & 2 Flat
Bed width 15” -380 mm
Lenght of gape in front of face plate 8”- 200 mm

Head Stock

Number of spindle speed 8
Range of spindle speed 30 to 490 RPM
Spindle nose dia. 3” -76 mm
Spindle bore 2.1/8” -52 mm
Spindle threads 6 TPI
Spindle morse taper (Inside) Mt – 4

Carriage & Compound

Cross Slide Dimension 10 -250 mm x 20” -510 mm
Cross slide travel 13” -330 mm
Compound slide dimension 14” -355 mm x 6” -155 mm
Compound slide travel 8” -200 mm
Tool post square 6” -150 mm
Tool shank section 1” -25mm x 1” -25 mm

Tail Stock

Spindle ram diameter 2.3/4” -70 mm
Spindle ram travel 8”-200 mm
Spindle ram morse taper MT -4

Threads

Number of threads range in metric 13
Number of threads range in inch 19
Number of pitch range in metric 1 to 6 PITCH
Number of pitch range in inch 2 to 24 TPI
Lead screw diameter 1.1/2” -38 mm
Lead screw threads 4 TPI

Special Features
Flame hardened bed ways.
Bed is made from high quality cast iron & strictly inspected with microlevel & straight edge.
Headstock spindle is made from high tensile steel duly hardened & ground.
Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
Tail stock spindle is hardened & ground, made from alloy steel.
Meticulous care is taken in selecting the right raw material for every component.
Each & every component is passed through strict quality control.
Machine accuracy is tested as per IS : 1878 (Part – I) 1971.
Standard Accessories
Chuck back plate, tool post spanner, Centre adapter, Dead centres – 2 nos, Motor Pulley, Change gear set.
Optional Accessories
Face plate, Steady rest, Follow rest, Carrier plate, Full or Semi Norton gear box, Rear tool post with extended cross slide, Coolant pump with tank & fittings, Taper turning attachment, Machine lamp, Electric Motor, R/f Switch, Motor Vee Belt, Dog chuck, True chuck, Spindle bore (3.1/8” – 80mm, 4.1/8” -100mm, 5.1/8” -130mm, 6.1/8” -155mm)
Electrical
Motor Recommended 5 H.P. / 3.7 KW
Colour Option
Green / Grey / Blue (Double Tone Colour at Extra Cost)

General Specification

Model Machine Weight (Approx) Kgs. Floor Space (Approx) L x W x H (mm)
EHD-1 1450 kgs. 2000 x 1150 x 1650
EHD-2 1650 kgs. 2450 x 1150 x 1650
EHD-3 1750 kgs. 3000 x 1150 x 1650
EHD-4 1950 kgs. 3450 x 1150 x 1650
EHD-5 2150 kgs. 4100 x 1150 x 1650
EHD-6 2550 kgs. 4750 x 1150 x 1650
EHD-7 2950 kgs. 5350 x 1150 x 1650
EHD-8 3450 kgs. 6100 x 1150 x 1650
EHD-9 3950 kgs. 6400 x 1150 x 1650